FUV Ships to Belgium for Alignment, Environmental Tests and Calibration in the Far Ultra Violet

Claire Raftery 0 4871

The preliminary alignment for the Far Ultraviolet Spectrograph (FUV) instrument using visible wavelength light has been completed at Lockheed Martin. The next phase of testing will see the instrument ship to Belgium to complete the alignment in the FUV in a specialized vacuum chamber.

The FUV ICON instrument has an articulating field of view. In order to accommodate this, special machinery is required to rotate the instrument during alignment, testing and calibration while inside the vacuum chamber. Centre Spatial de Liege (CSL) in Belgium will provide this unique ultraviolet vacuum facility.

The design for the FUV instrument is such that the optical system can be focused using visible light and a visible grating, as well as FUV light and grating. This is preferable, since alignment using UV must be performed in a vacuum chamber, which makes it more challenging to conduct the alignment.

Over the past four weeks, the SSL team has been traveling to Lockheed Martin where the instruments’ mirrors were carefully adjusted to achieve best focus and optimum spectral performance at visible wavelengths. The visible wavelengths chosen were suitably scaled to simulate performance at the FUV operating wavelength.

The next phase of testing will see the optics package ship to Centre Spatial de Liege (CSL) in Belgium. After verifying the visible alignments were maintained, and no shifts happened during transport, the UV grating and the two UV cameras will be installed and UV alignment will begin.

EUV Alignment and Calibration has begun

Claire Raftery 0 4866

ICON's Extreme Ultraviolet (EUV) instrument is an “imaging spectrometer”. Its 2 dimensional detector records spectral information over the range 58.4 to 83.4 nm in the one direction, and records 12 degree wide x 1/4 degree high slices of the sky over a 16 degree field of view in the other direction.

In preparation for alignment of the toroidal grating used in the EUV instrument, an optical system has been setup to simulate the cylindrical wavefront. This simulates the instrument’s view for each slice of sky while in orbit. The optical set up consists of a convex sphere and a concave toroid that produces a line image on the EUV entrance slit to simulate what EUV will observe in space. This optics pair will be used to first align the EUV instrument using visible light, then the final alignment will take place in a vacuum chamber using EUV radiation, since EUV light is not transmitted in air.

ICON passes Critical Design Review

Claire Raftery 0 3916

During the review, each instrument and system were reviewed, and plans for integration of these systems onto a unified payload finalized. The team was successful in demonstrating their ability to complete these tasks on schedule. All instruments will be delivered to Utah for integration by the end of the calendar year, before delivery to Orbital ATK in Virginia by May 2016, in preparation for launch in June 2017.

Project Manager Bill Craig said “One of the key strengths was the consistency of the team; we were compared to the high quality expected of a Class B mission; a standard we set for ourself at PDR” and P.I. Thomas Immel complemented the team on an outstanding job in preparing and delivering a very successful review.

Congratulations to the entire ICON team… Onwards to Integration!

ICON Confirmed – Proceed to Implementation

Claire Raftery 0 4725

On October 29th 2014, the ICON mission was reviewed at NASA Headquarters, where the project presented the status of the project, focusing on the work that had been done to design and formulate the mission to the Science Mission Directorate and the Deputy Administrator for Programs at NASA HQ. At this review ICON was successfully confirmed and was directed to proceed with formulation the mission.

The team has been working together through the successful Mission Preliminary Design Review in July and in the months that followed to reach this key milestones. Preparation for this step has also been a focus for colleagues in the Explorers Office at Goddard Space Flight Center and in the Heliophysics Division at HQ. Everyone involved is excited to proceed with the implementation of the mission!

ICON Passes Preliminary Design Review

Claire Raftery 0 4282

The ICON Mission has now passed its Preliminary Design Review, where it is determined whether the design of the observatory and ground segment meet the mission requirements. After a season of 35 peer and design reviews that started back in April, the documentation and design for the Explorer were delivered and presented to the Standing Review Board at Orbital. Congratulations to the whole team are due, it has been an amazing effort!

RSS
12345
ICON skin is based on Greytness by Adammer
Background image, courtesy of NASA, is a derivitave of photograph taken by D. Pettit from the ISS, used under Creative Commons license