FUV is continuing its series of successful tests and calibrations at CSL in Belgium. Once all of instrument’s accelerometers have been mounted, the Z-axis vibration test will be conducted. FUV is on schedule for delivery for integration in Utah, early in 2016. 

While the IVM enjoys many years of heritage, the ICON IVM has improvements and modifications that will produce measurements of the plasma drift with unprecedented sensitivity to achieve the ICON science goals. 

The second IVM (IVM-B) fabrication is following closely behind IVM-A and is in the final phases of test and assembly. IVM-B faces in the aft direction on the spacecraft during normal operations, when the remote sensing optical instruments view the northern hemisphere. However, it will be activated during operations when the spacecraft is rotated to allow the optical instruments to view the southern hemisphere.

The preliminary alignment for the Far Ultraviolet Spectrograph (FUV) instrument using visible wavelength light has been completed at Lockheed Martin. The next phase of testing will see the instrument ship to Belgium to complete the alignment in the FUV in a specialized vacuum chamber.

The FUV ICON instrument has an articulating field of view. In order to accommodate this, special machinery is required to rotate the instrument during alignment, testing and calibration while inside the vacuum chamber. Centre Spatial de Liege (CSL) in Belgium will provide this unique ultraviolet vacuum facility.

The design for the FUV instrument is such that the optical system can be focused using visible light and a visible grating, as well as FUV light and grating. This is preferable, since alignment using UV must be performed in a vacuum chamber, which makes it more challenging to conduct the alignment.

Over the past four weeks, the SSL team has been traveling to Lockheed Martin where the instruments’ mirrors were carefully adjusted to achieve best focus and optimum spectral performance at visible wavelengths. The visible wavelengths chosen were suitably scaled to simulate performance at the FUV operating wavelength.

The next phase of testing will see the optics package ship to Centre Spatial de Liege (CSL) in Belgium. After verifying the visible alignments were maintained, and no shifts happened during transport, the UV grating and the two UV cameras will be installed and UV alignment will begin.

ICON’s Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) instrument includes two identical optical assemblies, one for each of the perpendicular fields of view that will observe thermospheric wind-vector and temperature profiles. An engineering unit of the optical assembly was completed and successfully vibration tested in June 2015 at the Naval Research Laboratory.